ඩිව්ඩි ප්ලෙයර් අන්ලොක් කිරිම හේවත් කනටි්රකොඩි ලබාදිම
What are "regional codes," "country codes," or "zone locks"?
ඩිව්ඩි ප්ලෙයර් අන්ලොක් කිරිම හේවත් කනටි්රකොඩි ලබාදිම
What are "regional codes," "country codes," or "zone locks"?
ලොකයේ එක් එක් කලාපවල රටවල්වල චිත්රපට දර්ශන සදහා විවිධ වර්ගිකරන හා
ඩිවිඩි සදහා එක් එක් කලාපවලඇති විවිධ සමිමුති නිසා
ඩිවිඩි නිෂ්පාදකයන් ව්සින් ඔවුන්ගේ ඩිවිඩි තැටි සදහා කෙත ක්රමයක් මගින් ඔවුන් සදහන් කරන කලාපවලින් පිට කලාපවල ඇති ඩිවිඩි තැටි ධාවන යන්ත්රවල එම තැටි ධාවනයවිම වලක්වා ඇත
නමුත් මෙය නිතිමය තත්වයක් නොවෙයි
පලමුව අප භූගොලීය තත්වය අනුව කලාප 8කට බෙදාඇති ආකරය ගැන
අවබොදකරගනිමු කරගනිමු
Standard DVD Regions
Region | Countries |
0 | No Region Coding |
1 | United States of America, Canada |
2 | Europe, including France, Greece, Turkey, Egypt, Arabia, Japan and South Africa |
3 | Korea, Thailand, Vietnam, Borneo and Indonesia |
4 | Australia and New Zealand, Mexico, the Caribbean, and South America |
5 | India, Africa, Russia and former USSR countries |
6 | Peoples Republic of China |
7 | Unused |
8 | Airlines/Cruise Ships |
9 | Expansion (often used as region free) |
Blu-ray Regions
Region | Countries |
A | North America; Central America; South America; East and Southeast Asia; U.S. territories; Bermuda |
B | Africa, Europe, Oceania; Middle East; Kingdom of the Netherlands; British overseas territories, French territories; Greenland |
C | Central and South Asia; Mongolia, Russia, and People's Republic of China |
එක් වර්ගයේ ඩිවිඩි තැටි ධාවක යන්ත්රවල කලාප අංක මාරුකරගන්නා ඇකාරය පහත දැක්වෙයි
Samsung BD-P1600 region code
1) Press the POWER button on the remote to turn on the
machine (no disc in the tray).
2) Wait till the player has booted up and the Samsung logo
screen is displayed.
3) Press the OPEN/CLOSE button on the remote twice, to open
then close the disc tray.
4) As soon as you see "No-Disc" displayed in the top left
corner, press the REPEAT button followed by the 5 digit code
for your current region as listed below.
(Mine was 57538 for region 2)
Don't press the REPEAT button for too long, just smoothly
press REPEAT 5 7 5 3 8.
If it doesn't work straight away, keep trying, mine worked
on the first go.
5) If you're successful, your current region code will be
displayed in the top left corner of the screen.
6) Press '9' to make your player region free.
7) Turn the player off, then on again and test with a
different region disc, or if you don't have one to test
with, just repeat the hack and instead of your old region
code appearing in the top left corner of your screen, you
should see '9' if you've been successful.
The hack can be repeated to turn your machine back to it's
original settings or to a particular region if the disc is
sensative to region free machines.
Region Codes
R1 - 29334
R2 - 57538
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462
Aiwa AVJ-R5 / AVJ-X55 / HV-DH1 / HV-DH10 / XD-AX36
- Go to this site: http://members.tripod.com/aiwaownersnetwork/pages/lg/5000_series_firmware.html and download the zip file
- Unpack the zip and burn the file onto a CD
- Load the CD into the player and select region 0
- Switch off and back on
- If "check region code" is still displayed, using your remote, press disply, disc menu, play in that sequence quickly
Aiwa HT-DM150
- Turn on the player (without a disc inserted)
- Press ENTER
- Press 8, 4, 2, 6, 9
- Press ENTER again
Aiwa HT-DV50 / XD-DV50
- Press ON/OFF on the player
- Press and hold MENU, TOP MENU, OSD
- After approx. 3 secs "Factory" is displayed
- Release the keys
- Turn on the player
Aiwa HT-DV90
- Press DVD/CD
- Press OPEN
- Press C, 2, 5, 8, 0, C ("Testmode" is displayed)
Onscreen display shows current RC - Press Up ("14 02" is displayed (02 is RC))
- Press 1, 4, 0 and X (X = region; 0 = codefree)
- Press ENTER
- Press RETURN ("Testmode" is displayed)
- Press C ("EEP CLR and EEP ERR" is displayed)
- Insert a DVD
- Press RETURN
Aiwa XD-520KS / XD-DV520 / XD-DV520 KS
- Turn on the player (without a disc inserted)
- Open the disc tray
- Press MENU
- Press 1, 6, 7
- Current region is displayed
- Press MUTE
- "All" is dislayed
- Turn the player off
Aiwa XD-AX10
- You need an OneForAll remote (URC 7030)
- Press "DVD" on the player
- Press and hold MAGIC
- Enter 0, 5, 3, 3
- Press and hold MAGIC again
- Enter 9, 9, 4
- Press MAGIC
- Press "1-5" and enter the following code
- Repeat from step 4 until all 5 keys are programmed: Key 1: 189 // Key 2: 255 // Key 3: 095 // Key 4: 221 // Key 5: 079
- Turn on the player (standby /without a disc inserted)
- Press "1-5"
- Player turns on
- Press "1-5" again
- Player turns off
Aiwa XD-DV170
- Possibly only works with RC 4!
- Plug the player in, but don't turn it on ("Off" is displayed)
- Press and hold MENU
- Press and hold TOP MENU
- Press and hold POWER
- Press all 3 buttons for 3 secs and then release them
"Factory" is displayed - Turn on the player
Aiwa XD-DV290 / XD-DV370 / XR-DV370 KN
- Press PAUSE
- Press 3, 1, 4, 1, 5, 9
- Press the button for the desired RC (0=codefree)
- Press PAUSE
- Turn the player off
Aiwa XD-DV480
- Plug the player in and turn it on with the remote
"No Disc" is displayed - Press PAUSE, 8, 9, 2 and 6
"CODE__" is displayed - Press 0 2x within 5 secs
- Press PAUSE and POWER
Aiwa XD-DW1 / XD-DW5 / XD-DW7
- Turn on the player
- Insert a disc
- Open the disc tray, take the disc out, close the disc tray, press STOP instantly
- Press 8, 7, 2, 0 and >>
For selection of a specific RC replace >> with Code (1-6).
If this doesn't work, press 1 insted of 2 in step 4!
Aiwa XR-DV525
- Unplug hte player
- Press and hold DVD/CD
- Plug the player in
- Press FFW
- "Factory" is displayed
- Release the keys
Aiwa XD-DV520
- Using the open button on the machine, open the disc tray. Make sure it's empty.
Make sure you can see the dvd on your TV screen - Press MENU on remote (not top menu), you should see the on screen pictoral graphics on your TV screen
- Using the remote, press 1, 6, 7
- On the screen you should see over the top of the graphics "region 1-6" (I have not tried, but you might be able to set one region by pressing remote number from 1 to 6)
- Press MUTE button and next to "region 1-6" you should see "all"
- Then use the remotes POWER OFF button and the dvd should close the (empty) tray
- Restart the unit, put in a region disc and it should play it
Akai ADR-5800Di
- Insert any disc
- Press CLEAR, 2, 5, 8, CLEAR
- The service menu will then come up.
- Enter the region you want (0 = multi-region)
Akai ADV-1120 / ADV-1250 / DV-P2340 / DV-P2440 / DV-P2540 / DVD-2100SS / DVR-2100SS
- Turn on the player
- Open the disc tray
- Press 3, 3, 0, 8, 0
- "XXXX" is displayed.
- Enter the region (0 = multi-region)
- Close the disc tray
- Turn it off
Akai ADV-8000 / ADV-8175 / DV-P2500 / DVP-8000
- Turn on the player (without disc inserted)
- Press 8, 9, 2, 6, X (X = region; 0 = multi-region)
Akai ADV-9000 / DV-P3410 / DVD-3140
- Open the disc tray
- Press 8, 4, 2, 1
- A menu should appear. (9 = multi-region)
Akai DHT-300
- Turn on the player (without a disc inserted)
- Press STOP
- Press 1, 9, 9, 9
- Current region is displayed
- Select "Region Code"
- Press ENTER
- Select region using UP/DOWN ("Free" = multi-region)
- Press ENTER
- Press SETUP
Akai DV-P1000
- Press and hold EJECT and A-B while the player is off
- Turn it on, display says "A:00 D:12"
- Change digit after "A" to 05 with PLAY and STOP
- Change digit after "D" with SKIP keys to "00" (this is the region)
- Save with PAUSE
- Turn the player off and on
Akai DV-P2000
- Turn the player off
- Press and hold FAST FORWARD and STOP and the black button
- Turn on the player (with POWER)
- When the AKAI logo is shown, release FAST FORWARD and STOP
but keep holding the black button
A list, separatet into columns, appears - Press ENTER
- Press CURSOR RIGHT
- Change it to '00' for region free
- Press ENTER
- Press POWER to turn the player off
- Release the black button
- Turn on the player
Akai DV-P3470 / DV-P3570 / DV-P3570S
- Turn on the player
- Press SETUP on the remote
- Press 4, 9, 5, 4, 0
- Go to "Version"
- Select region using LEFT/RIGHT (0 = codefree)
Akai DV-P3550
- Press ON/OFF
- Press OPEN/CLOSE
- Press SETUP
- Go into "PERFERENCE" at Setup Menu
- Scroll down to the "Country/RegioCode" and choose the country
Akai DV-P4000 / DV-P4500
- Turn the player off (OFF-Mode)
- Press DIMMER and SKIP BACK simultaneously
- Hold them and press POWER ON
- Four lines are displayed
- Enter '1999'
- 'A-0000 D-04' is displayed
- Enter:
'00' for RC 0 (Display: A-0000 D-00) (region free),
'01' fo RC 1 (Display: A-0000 D-01),
'02' for RC 2 (Display: A-0000 D-02) - Press ENTER
- Turn the player of ('Power ON/OFF')
Akai DV-P4330S / DV-P5380S / DV-P5570SL / DV-P5580SK
- Open tray
- Press 9, 7, 3, 5
- Select region 0
- Press ENTER
- Leave the menu
Akai DV-P4410 / DV-P4420S
- Open the disc tray
- Press 7, 7, 3, 9
- Press 0
- Close the disc tray
Akai DV-PX7000
- Open the disc tray
- Press 1, 0, 3, 0, 0
- 0 is displayed
- Turn the player off
Akai DVR-3100SS / DVR-3300SS / DV-R3400SS
- Open the disc tray
- Press 8, 1, 3, 2, 8
- Select region using ENTER (9 = multi-region)
- Press STOP
Akai DV-R4000SS / DV-R4150SS
- Turn on the player (without a disc inserted)
- Press SETUP
- Press STOP
- Press 5, 7, 0, 0
- Press STOP
- Enter region (0 = multi-region)
- Press SETUP
Akai DVD-200BL
- No disc must be inserted!
- Press OPEN/CLOSE on the remote
- Press SETUP
- Press 1, 3, 6, 9
- Press LEFT, LEFT, LEFT, RIGHT
- Select region (0 = multi-region)
Akai DVD-2100 / DVD-2100SS
- Open the disc tray
- Press 3, 8, 3, 8
- Select region (9 = multi-region)
Akai DVD-3850S
- Open the disc tray
- Press 8, 5, 6, 1
- A menu should appear
Akai DVPS-760
- Turn on the player
- Open the disc tray
- Press SETUP
- Press 9, 1, 0, 1, 0 (first digit (9) is for multi-region)
- Press STEP, SHUFFLE, NEXT
- Close disc tray
- To control the settings:
- Open the disc tray
- Press SETUP
- Press SHUFFLE, STEP, NEXT
- Go to the Debug settings. The current RC is shown there.
- Close disc tray
Akai HV-DH10 / HV-DH10N
- Insert foreign DVD
- Wait for "Check Region Code"
- Press DISPLAY, TOP MENU, PLAY quickly
Akai PDVD150
- Turn on the player
- Open the disc tray
- Enter 2120090
Hitachi DV-SD81E / DV-DS161E / DV-DS251E
- Open tray
- Press SETUP
- Highlight the lock symbol
- Press 0 seven times
Hitachi DV-P250P / DV-P305U / DV-P315E / DV-P350E / DV-P515E
- Cold start (1-3):
- Turn on the player and while doing this press and hold down STOP, PLAY at the player front
- When the language menu accurs, release STOP and PLAY
- Choose a language (1-6)
Samsung logo shows up - Press REPEAT
- Type in the code for the current country code:
Region 1: 2, 9, 3, 3, 4 // Region 2: 3, 8, 7, 6, 7
Region 3: 5, 6, 7, 3, 2 // Region 4: 7, 6, 8, 8, 4
Region 5: 5, 3, 8, 1, 4 // Region 6: 2, 4, 4, 6, 2
The current country code should be displayed - Enter the desired country code (1-6; 9=codefree)
- Press OPEN
- Press STANDBY
Hitachi DV-P303U
- Turn on the player (without a disc inserted)
- Press and hold PLAY
- Turn on the player
- Release the key
- Open the disc tray
- Insert a RC0 DVD
- Play the DVD
- Open the disc tray during the playback
- Take out the DVD
- Enter 1445 5569 0000
- Turn the player off
Hitachi DV-P305E
- You need an AIWA hifi remote control
- Open tray
- Press SHIFT, 9, SHIFT, 9, SHIFT, 9
Hitachi DV-P323U
- Open tray
- Press 9, 9, 9, 9
- Enter the region (0 = multi-region)
Hitachi DV-P335E / DVPF3E
- Firmware update and instructions at
www.wrang.com/hitachi/Hitachi_DVP335E.htm and www.wrang.com/hitachi/Hitachi_DVPF3E.htm
Hitachi DV-P415U
- Open the disc tray
- Press and hold ENTER
- Enter desired country code (1-6)
- Release ENTER
Hitachi DV-P505
- Press SETUP
- Press LAST, PREV, NEXT
- Select the region
Hitachi HTD-K150
- Open the disc tray
- Press VOLUME UP, FFW
"321" should appear - Press VOLUME UP and FFW to select the region
- Press and hold ANGLE for 5 secs
Hitachi HTD-K160
- Open tray
- Press and hold VOLUME UP
- Press LANGUAGE
- Change the region with the DOWN button (0 = multi-region)
- Press ENTER
Hitachi PDV302
- Open the disc tray
- Press SETUP
- Go to "Preferences Pages"
- Press DISPLAY
- Press 0, 2, 8, 3
- Press DISPLAY
- Press 0
- Press SETUP
- Turn the player off
C TH-A5R
- Switch on the player with no disc in tray
- Press and hold STOP on the player until "initial" is displayed on the LCD
- Release the STOP button
- Press VOLUME- until the minimum is reached
- Press VOLUME+ until the maximum is reached
- Press OPEN/CLOSE and put in your disc
- Close the tray
JVC VCD 2000 BK
- Turn the player off
- Press and hold ONSCREEN and DVD MENU
- Turn on the player
- Release ONSCREEN and DVD MENU
- Press STBY ON; "test 4" is displayed
- Press DVD MENU twice
- Press UP until "02Exxxx" is displayed
- Select RC: 000X (X = 1-6 or "0" for multi-region)
- Press ENTER to save
- Press STBY OFF, STBY ON
JVC XDB 2000 / XDB 2000 BK / XV 2000 / XV 200 BK / XV D 2000 / XV N 5
- Turn on the player (without a disc inserted)
- Press and hold ON SCREEN and DVD MENU
- Turn on the player
- Release the keys
- Press STANDBY/ON
- Device should be in test mode now
- Press DVD MENU twice
- Press UP, DOWN until "02E" is displayed
- Select desired RC (last digit) with RIGHT, LEFT (0=codefree)
- Press ENTER
- Press STANDBY/ON
JVC XV 521 / XV 522
- (with no disc in the tray)
- Press and hold PLAY and OPEN/CLOSE
- Turn on the player
- Release PLAY and OPEN/CLOSE
- Press 3D-PHONIC
- Press MENU, MENU
"000 5858" is displayed - Change "000" to "02e" with DOWN
- How to change the last four digits:
0000 for codefree
0101 for RC 1, 0202 for RC 2, ... - Press ENTER
- Press STANDBY
- Press STANDBY again after 5 secs
If it doesn't work, skip step 4.
JVC XV M 512 SL / XV S 300 BK / XV S 302 Silver
- It has to be no disc inserted
- Unplug the player and turn it on WHILE OPEN/CLOSE is pressed at the player
- "TEST" is displayed
- Press 9 on remote, until "00A0 0000" is displayed
- Press "Standby/On"
- Wait for 15 secs
- Turn on the player
JVC XV S 500 BK
- It has to be no disc inserted
- Turn the player off and uplug it
- Press and hold PLAY and STOP, while doing this plug the player in
- "TEST************" is displayed
- Press PAUSE on the player
- Wait until green display/LED flashs (after about 10 secs)
- Turn the player off
Kenwood DDX7015
- Put a disc into the player
- Power off
- Power on
- Press and hold PLAY
Kenwood DV-605 / DVF-R5060
- Insert a DVD
- Wait for the player to display "disc error"
- Press 1
Kenwood DV-2070 / DVF-3050
- Turn on the player (without a disc inserted)
- Press and hold PLAY on the player for10 secs
- Turn the player off and on again
Kenwood DVF-3060
- Method 1:
- Insert disc with foreign region code
- "Disc Error" is displayed
- Press STOP until "DI" is displayed
- Now you can select the chapters directly
- Method 2:
- Wait for "disc error"
- Open tray
- Close tray
Kenwood DVF-3550
- Open the disc tray
- Press PLAY and STOP on the player for 10 secs
- Turn the player off
- Press and hold PLAY
- Turn on the player
- Open the disc tray
Kenwood DVF-5010 / DVF-7010
- Turn on the player (without a disc inserted)
- Press PLAY on the player for 6 secs
- Change region using UP/DOWN
- Press ENTER
Kenwood DVT-8100
- Insert a DVD
- Wait for the player to display "disc error"
- Press 1, 1, MENU
LG 2002 / 2230P / 2240N / 2300 / 2310P / 2330P / 2380P / 3000P / 3030N / 3030P / 3200 / 3200E / 3251P / 3315E / 3350E / 3351 / 3351E / 3351P / 3520 / 3525 / 3530 / 3630 / 4020N / 4220 / 4593 / 4710 / 4721P / 4750 / 4730 / 4821P / 4830 / 4921P / 4941P / 4959 / 5502 / 5502P / 5620 / 5630 / 5772N / 5812N / 5822N / 5822P / 5850A / 5921N / 5930 / 5942E / 593NW / 593W / 5942E / 5942P / 595NWQ / 596M / 6043 / 6053 / 6230 / 6812P / 7352N / 7911N / 884B / DA3520 / DA3530A / DA3620 / DA3630 / DA5630 / DC-365 / DC-489 / DC-596M / DC-593W / DC-596B / DC-784M / DE-8421P / DF8900P / DF9921N / DF9921P / DGK585XB / DK5922P / DK-7711P / DK-7821P / DK7942P / DK9923N / DK9923P / DKS-5000 / DKS-6000 / DP9911P / DS375 / DS563X / DT-585 / DT-777W / DV-6842P / DV-7821 / DV-7942P / DV-8621P / DV-8651C / DV-8700C / DV-8721P / DV-8743P / DV-8900C / DV-8921N / DV8931H / DV9723P / DV9823P / DVCR-2002 / DVD4710 / F-DV25 / F-DV55 / LH-C6231 / VD4730 / LH-D6240 / LH-D6245 / LH-D6246 / LH-T6340 / LH-T6345 / LH-T6540 / V-692W / V782NWK / V782W / V8706 / V8716 / V8824W / V9120W / V9800 / V88060VX / VD4730
- Power on (with no disc inserted)
- Press PAUSE
- Press 3, 1, 4, 1, 5, 9
- Enter the desired RC
- Press PAUSE
- Turn the player off and wait a few seconds
- VCD playback
- Press PAUSE, 1, 4, 7, 2
- Press UP 6 times, '07 00' should appear on the display
- Press Program 6, Program 5 ('07 FE' should be displayed)
- Press ENTER
- Press RETURN
- Power off and on again
LG 3620 / 5063 / 5073 / 5083 / 5084 / 5095 / 5174 / 5183 / 5184 / 5193 / 5195 / 5253 / 5353 / 5930 / 5931 / 5935 / 6033 / 6053 / 6054 / 6183 / 6188 / 6193 / 6194 / 6195 / 6196 / 6353 / DR250 / DV1000 / DV2000 / DV7832NXC / DVB418 / DVC8700 / DVP-S500 / DVP7772 / DVS-7720 / DVS-7920 / DVS-7800 / DVT418 / LDA-511 / LDA-530 / LDA-531 / LH-CX247W / LH-CX440 / LH-D6230 / LH-D6235 / LH-D6430 / LH-D6530D / LPA-534
LG DP8821 / DP9821P / DV-8700H / DV-8600 / DV-8631V / DV-8700A / DV-8700H / DV8761 / DV-9700 / DV-9800H / DV-9900 / DVC9800 / DVD-8742X / DVX-171 / DVX-173 / DVX-9700 / DVX-9900 / DVK-9913N / DVX-7900 / DVX-8651C / DVX-8751C / DVX-8851 / DVX-9700 / DVX-9843 / DVX-9900 / DZ9311N / DZ9700 / DZ9811P / DZ9900 / LH-SW5200 / LH-T1000 / LH-T250 / LH-T252SC / LH-T751TB / LST-3510A / LXD-5230 / NS8421T
- Turn on the player (without disc inserted)
- Open the disc tray
- (Press PAUSE)
- Press 0, 0, 0, (0)
- Enter region (1-6; 0=region free)
- (Press PAUSE)
- Turn it off
LG DR-4810 / DR-4912 / DR-4922 / DR-6621 / DR-6921 / DR-7400 / DR-7500 / DR-7621N / DR-7800 / DR-7900MH / DR-7922W / DR4812W / HDR589X / LGR435 / LGVR435 / LRA-516 / LRA-536 / LRA-537 / LRA-539 / LRY-517 / RC-6800 / RC-68223 / RC-6921W / RC-7000 / RC-7300 / RC-7723W / RC6821W / RH-177 / RH-188H / RH-199H / RH-4810 / RH-4820 / RH-4820W / RH-4840 / RH-4920 / RH-4940 / RH-7500 / RH-7521W / RH-7624W / RH-7800 / RH-7800H / RH-7823W / RH-7900H / RH-7900MH / RH-7926W / XBR446
- Open the disc tray
- (Press SETUP and scroll to 'Lock')
- Press 0 seven times
- (Press ENTER, Setup)
LG DVD-8742X
- Press STOP for 5 secs to set Progressive Scan on or off (no disc in tray)
- Press PAUSE Pause for 5 seconds to switch between NTSC or PAL
To change the region, see above.
LG 3350P / 3500 / 3535 / 3700A / 4351 / 5081 / 5094 / 5194 / 5500N / 6622NC / 6956NDC / 7732NSC / DAT200 / DAW6100 / DC-873M / DC-8814M / DC476 / DCK583 / DK377 / DK6822P / DM6944P / DP4932N / DP5932P / DP8811P / DR-4712 / DR-6600 / DR-7900D / DR-7900H / DR-7900M / DR576X / DS-7532N / DS8421P / DS8521P / DS8551E / DT-777W / DV-7934NDMC / DV-8631C / DV379 / DV8751C / DVCR-B100 / DVD-9913N / DVF-9900 / DVIX8816W / DVP-9800 / DVP-L39 / DVR313 / DVS-7700 / DVS-7900 / DVS-7905 / DVX-8951C / DVX-9743 / DVX-9800 / DW-6512N / FFH-DV25AD / LDV-535 / LH-D6241 / LH-SW5100 / LH-T550TB / LH-T6245 / LH-T6740D / LH-W551TB / LH-W6200 / LHY-518 / LMD5530 / LRM-519 / RC-6821W / RC-7723M / RC6921W / RH-7900M / RH-7924N / RH-S7750MH / V-8705 / V-872NW / V8816 / V8827W / V8916 / V9722W / VC-8704 / VC-8804M / VC9800 / XBR342
NEC DHT-200
- Open the disc tray
- Press 8, 9, 2, 6
- Press the button for the desired region (0 = codefree)
- Close the disc tray
NEC DHT-300
- Press SETUP
- Select "Preferences"
- Select "Password"
- Enter 0000 as old password, 5425 as new password
NEC NDH-80 /NDH-160
- Press SETUP
- Scroll to lock
- Press 0 seven times
NEC NDP-70
- Press SETUP
- Press 9, 2, 1, 0
- Go to "regional code"
- Press 0 for multi-region
- Press SELECT
NEC NDR-50
- Open the disc tray
- Press 0, 0, 0, 0, 0, 0, 0
- Enter desired RC (0 = codefree)
NEC NDT-40 / NDV-21 / NDV-22 / NDV-22R / NDV-23 / NDV-24 / NDV-25 / NDV-30 / NDV-31 / NDV-40 / NDV-100
- Turn on the player (without a disc inserted)
- Press PAUSE on remote
- Press 3, 1, 4, 1, 5, 9
- "Code" should be displayed
- Press the button for the desired RC (0 = codefree)
- Press PAUSE
- Turn the player off
NEC NDT-41 / NDV-26 / NDV-27 / NDV-29
- Press EJECT
- Enter 0, 0, 0
- Enter the region you want (0 = multi-region)
- Press PAUSE
NEC NDRV-60, NDV-1, NDV-32
Pioneer DCS-100
- Turn on the player (without a disc inserted)
- Press SETUP DVD
- Press GENERAL
- Select "Basic"
- Press SHIFT and DVD DISPLAY simultaneously
- Current RC should be displayed
- Select RC with SHIFT and CONDITION (press them simultaneously)
- Press SHIFT and DVD DISPLAY simultaneously
DCS-222 / DCS-303 / DCS-313 / DCS-333 / DCS-340 / DCS-505 / DV-250 / DV-260 / DV-2650 / DV-266 / DV-275 / DV-2750 / DV-2850 / DV-350 / DV-353 / DV-354 / DV-355 / DV-360 / DV-366 / DV-370 / DV-380 / DV-434 / DV-454 / DV-45A / DV-464 / DV-466 / DV-470 / DV-47Ai / DV-555 / DV-565A-S / DV-575A / DV-578A / DV-585A / DV-646 / DV-655A / DV-656A / DV-667A / DV-668AV-S / DV-757Ai / DV-868AVi-S / DV-989AVi / DV-C505 / DV-S858Ai / DV-U7 / EV61DVD
- You'll need a Palm with OmniRemote software
- Type in (or transfer) the memo below to your PDA
Import it into OmniRemote with this menu command:
Advanced-->Databases-->Import category - Point your PDA towards your player put OmniRemote in TV-mode and press 0 (Zero)
Memo (Name: Category-TV): Category-TV Button name-Enter 0000 0067 0000 0000 Button name-0 0000 0067 0000 0044 0155 00ac 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0404 0155 00ac 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0404 Button name-7 0000 0067 0000 0000 Button name-8 0000 0067 0000 0000 Button name-9 0000 0067 0000 0000 Button name-4 0000 0067 0000 0000 Button name-5 0000 0067 0000 0000 Button name-6 0000 0067 0000 0000 Button name-1 0000 0067 0000 0000 Button name-2 0000 0067 0000 0000 Button name-3 0000 0067 0000 0000 Button name-Channel up 0000 0067 0000 0000 Button name-Channel dn 0000 0067 0000 0000 Button name-Last 0000 0067 0000 0000 Button name-Volume up 0000 0067 0000 0000 Button name-Volume dn 0000 0067 0000 0000 Button name-Mute 0000 0067 0000 0000 Button name-Power 0000 0067 0000 0000 Button name-Favorite 0000 0067 0000 0000
Pioneer DV-37 / DV-333 / DV-444 / DV-505 / DV-535 / DV-626 / DV-C302D / DV-C503D / DV-KZ01 / DVL-700 / DVL-909 / XV-HTD510
- Turn on the player (without a disc inserted)
- Press SETUP on the remote
- Select "General" with DOWN
- Select "Basic" with RIGHT
- Press ENTER
- Press DISPLAY
- Press CONDITION/MEMORY
- Press the button for the desired RC
- Press MENU
Pioneer DV-343 / DV-344 / DV-530 / DV-535 / DV-606 / DV-626 / DV-717
- Turn on the player (no disc)
- Press SETUP
- Select "General" with RIGHT
- Select "Basic" with DOWN
- Press ENTER
- Press DISPLAY
- Press CONDITION/MEMORY
- Select RC (RC1 = 1; RC 2 = 2 ... etc.)
- Press DISPLAY
- Press SETUP
Pioneer DV-373
- Open the disc tray
- Press SETUP
- Press 1, 9, 9
- Select the Region option from the menu
- Change to a specific region or all regions
- OR:
- Press 7, 6
- Press SELECT
- Highlight the Region option and press the button for the desired region (0 for multi-region)
- Press SETUP
AVH-P5700DVD / AVH-P6500DVD / AVH-P6600DVD / AVH-P7500DVD / AVIC-9DVD-II / AVX-P7300 / DCS-232 / DCS-240 / DCS-323 / DCS-424 / DCS-515 / DCS-535 / DV-05 / DV-09 / DV-101 / DV-270 / DV-285-S / DV-305 / DV-330 / DV-3310 / DV-340 / DV-341 / DV-343 / DV-3500 / DV-38A / DV-39A / DV-474 / DV-47A / DV-500 / DV-503 / DV-566K / DV-676A / DV-686A / DV-939A / DV-C36 / DV-C603D / DV-F07 / DV-F727 / DV-K102 / DV-K301C / DV-K302CD / DV-K303 / DV-K555 / DV-S633A / DV-S755Ai / DV-S838A / DV-S9 / DV-V550 / DV-V630 / DV59-AVi / DVD-V7400 / DVH-P5000MP / DVJ-X1 / DVL-888 / DVL-90 / DVL-919 / DVL-V888 / DVR-225 / DVR-231 / DVR-233 / DVR-330 / DVR-510H / DVR-533H / DVR-57H / DVR-65H / DVR-7000 / DVR-930H / DVR-RT300 / DVR-RT400 / DVR-RT500 / DVR-RT501 / DVR-RT601H / EV21DVD / EV51DVD / EV99DVD / HC-51 / HTD-330DV / HTD-5 / HTD-630DV / HTD-8 / HTZ-313DVD / HTZ-323 / HTZ-430DV / HTZ-625 / HTZ-77DV / HTZ-830DV / HTZ-900 / NS-DV1 / NS-DV77 / NS-DV88 / NS-DV990 / PDV-20 / PDV-LC20 / PRV-9000 / PRV-9200 / RCS-9H / VS500DVD / VSX 09TX / VSX 29TX / X-SV5DV / XV-DV77 / XV-HTD320 / XV-HTD340 / XV-HTD520 / XV-HTD7
Panasonic A112 / A115 / A120 / RC HT 80 / RP 56
- Open the disc tray
- Press 9, 8, 1, 7
- Select RC with ENTER (9=codefree)
- Press RETURN
- Close the disc tray
Panasonic DMR-E30 / SC-DK2 / S27
- Turn on the player (without a disc inserted)
- Press and hold SHIFT
- Press SETUP
- Release SHIFT
- Press ENTER 2 x
- Go to "Other"
- Enter RC (4-digit, e.g.0001)
- Press ENTER
- Press RETURN 2 x
- Turn the player off
Panasonic S49
- Unlock DivX playback: http://members.chello.nl/~m.schuitemaker1/
Panasonic PV40
- Press the key for the desired regional code and SELECT.
Panasonic A100 / A115 / A1250EC / A130 / A150 / A300 / A310 / A320 / A330 / A350 / A360 / A7 / C220 / CP67 / CP72S / CQ-DVR592U / CQ-VAD7300U / CT-27DC50 / CV35 / CV37 / CV40 / CV47 / CV50 / CV51 / CV52 / CX-DV700U / CX-DVP292N / CYVHD9401U / DMR-E10 /DMR-E50 / DMR-E500H / DMR-E53 / DMR-55 / DMR-E65 / DMR-E75VS / DMR-E80H / DMR-E85H / DMR-E95H / DMR-E100HS / DMR-EH50 / DMR-EH52 / DMR-EH54D / DMR-EH60 / DMR-EH60D / DMR-EH75V / DMR-EH80V / DMR-ES10 / DMR-ES20 / DMR-ES20D / DMR-ES30V / DMR-ES40V / DMR-HS2 / DMR-T2020 / DMR-T3030 / DMR-T3040 / DMR-T6070 / DV30 / F61 / F65 / F84 / F85 / F87 / Gamecube Q / HT-290D / HTD-510 / K520 / L10 / L50 / LA85 / LA95 / LS5 / LS50 / LS90 / LV50 / LV50EG-S / LV55 / LV60 / LV65 / LV70 / LX-V810 / LX8 / LX9 / LX95 / NV-VHD1 / NV-VP30 / NV-VP31 / NV-VP32 / P10 / PV-20DF62 / PV20DF63 / PV-27D53 / PV-D4732 / PV-D4733 / PV-D4734 / PV-D4741 / PV-D4742 / PV-D4743 / PV-D4744 / PV-D4752 / PV-D4762 / PV-D744S / PV-DF2003 / PV-DF2702 / PV-DF2703 / PV-DF2704 / PV-DM2093 / PV-DM2792 / PV-DM2799 / PV55 / RA60 / RA61 / RA71 / RA82 / RP56 / RP62 / RP82 / RP91 / RV20 / RV21 / RV22 / RV27 / RV31 / RV31E9-K / RV31U-K / RV32 / RV36 / RV40 / RV41 / RV60 / RV62 / RV65 / RV80 / S24 / S29 / S31 / S42 / S47 / S55 / S75 / S77 / S97 / S295 / S325 / SA-HT650 / SA-HT70 / SA-HT80 / SA-HT930 / SA-HT95 / SA-PM08 / SC-DK10 / SC-DK20 / SC-DK3 / SC-DM3 / SC-DP1 / SC-DT100 / SC-DT110 / SC-DT300 / SC-DT310E / SC-HDA710 / SC-HT1000 / SC-HT1500 / SC-HT290D / SC-HT335 / SC-HT500 / SC-HT520 / SC-HT650 / SC-HT67 / SC-HT670 / SC-HT680 / SC-HT690 / SC-HT70 / SC-HT700 / SC-HT720 / SC-HT730 / SC-HT75 / SC-HT790V / SC-HT80 / SC-HT800V / SC-HT810V / SC-HT820V / SC-HT830V / SC-HT850 / SC-HT870 / SC-HT880 / SC-HT900 / SC-HT920 / SC-HT928 / SC-HT930 / SC-HT95 / SC-MT1 / SC-PM08 / SC-PM39D / SC-PM91D / SC-VK70D / SCST1 / SL-DT100 / SL-GC10 / SL-VP30 / SL-VP45 / T-2000 / TC-15LV1 / TX15LV1 / X410 / XP30 / Xp50 / XV10
Philips 14PT6107 / 15PT6807
- Press 062596, MENU in TV mode
- Select "DVD"
- Press ENTER
- Select "Region"
- Enter 0 for multi-region
- Press MENU
- Turn the player off
Philips DFR 1600 / MX1060D
- Press SYSTEM
- Press 1, 6, 7
- Press MUTE
Philips DVD 170 / DVD 825 / DVD 935
- Stop the player, no disc has to be inserted
- Press 2, 7, 4
- An input field shows up
- Enter one of the following codes:
RC 1: 00500128156
RC2: 00200128156 - Press any key
- Display turns red...
Caution! only works 25x!
Philips DVD 580HC / 580MT
- Open the disc tray
- Press PROGRAM
- Press 1, 3, 5, 6
- Press the button for the desired RC (0=codefree)
- Press STOP five times
- Press OK
- Close the disc tray
Philips DVD 590M
- Select "disc menu"
- Press 1, 9
- Scroll to "region"
- Set the region using the arrow keys
- Press OK
- Press EJECT
Philips DVD 612 / DVD 620 / DVD 631 / DVD 700 / DVD 701 / DVD 705 / DVD 710 / DVD 711 / DVD 712 / DVD 718 / DVD 722 / DVD 723 / DVD 725 / DVD 743 / DVD 750 / DVD 751 / DVD 756 / DVD 761 / DVD 763SA / DVD 795SA / DVD 825 / DVD 865AT / DVD 940 / DVD 951 / DVD 952 / DVD 955 / DVD 957 / DVD 958 / DVD 960 / DVD 963SA / DVD Q50
You need an OneForAll6 remote (URC 7560)
- Press DVD device button (set remote to DVD)
- Press and hold MAGIC until it flashes 2x
- Enter Setup Code (0539)
- Press MAGIC again
- Enter 085
- Enter 222 222 005 255
- (should be displayed)
- Press PLAY
- Press and hold 1 and 6 until SYNTH is displayed.
Philips DVD 615 / DVD 616K / DVD 623 / DVD 624AT / DVD 724 / DVD 724AT / DVD 733K / DVD 736K / DVD 762 / DVD 765K / DVD 781 / DVD Q30 / DVD Q35 / DVD Q40
- Open the disc tray
- Press 1, 1, 1, 1
- Press the button for the desired RC (0 = codefree)
- Current RC is displayed
- Close the disc tray
Philips DVD 622 / DVp 4000
- Open tray
- (DVP 4000: Press DISPLAY)
- Press 2, 8, 1, 2
- Press OK until 9 (multi-region) is displayed
- (DVP 4000: Press DISPLAY)
- Power off and on again
Philips DVD 625 / DVD 626K / DVD 627K / DVD 628 / DVD 726 / DVD 726AT / DVD 726KT / DVD 727 / DVD 728 / DVD 728S / DVD 729 / DVD 731 / DVP 320 / DVP 323 / DVP 720SA / DVP 762 / DVP 5900 / HTS3300 / HTS3450 / HTS3500 / HTS3610 / HTS5000W / HTS5310S / HTS5500C / HTS5510C / HTS6500 / HTS8010S / LX3600D / LX3900SA / LX3950 / LX8300SA / LX8500W
- Open tray
- (Press DISPLAY)
- Enter 9, 9, 9, 9, 0
- Close tray
Philips DVD 630 / DVP 630 / DVP 632 / DVP 642
- Open the disc tray
- Press 7, 8, 9
- Press OK
- Press the button for the desired RC (0 = codefree)
- Current RC should be displayed
- Close the disc tray
Philips DVD 633 / DVD 634 / DVD 640 / DVD 733
- Open the disc tray
- Press 0, 0, 0, 0, 0 (last digit is the region)
- Close disc tray
Philips DVD 702 / DVD 704 / DVD 714 / DVD 953
- Turn on the player (with no disc)
- Press PAUSE
- Press 3, 1, 4, 1, 5, 9
- "Code" should be displayed
- Press the button for the desired RC (0 = codefree)
- Press PAUSE
- Power off
Philips DVD 703 / DVD 870L / DVD 870P / DVD 950
- Turn on the player (without a disc inserted)
- Press PLAY, 1, 5, 9
- A field with lines appears
- Enter 005 000 128 156 for RC1 or 002 000 128 156 for RC2
- Press PLAY
- Display turns red...
Caution! this only works 25x!
Philips DVD 707
- Press SETUP
- Open the disc tray
- Pres 8, 4, 2, 1
- Current RC should be displayed
- Press SELECT
- Enter RC (9=codefree)
- Close the disc tray
Philips DVD 730
- Stop the player, no disc has to be inserted
- Press 2, 7, 4
- An input field shows up
- Enter one of the following codes:
For RC 1: 0060001 281 56
For RC 2: 0010001 281 56
For RC 3: 0090001 281 56
For RC 4: 0110001 281 56 - Press any key
- Display turns red...
Caution! this only works about 25x!
Philips DVD 730
- Turn on the player (without a disc inserted)
- Press PLAY, 274159
- A field with lines appears
- Enter 222 222 005 255
- Press PLAY
- Display turns red...
- Wait20 secs
- Turn the player off with the power switch
Philips DVD 737
- Open the disc tray
- Press MENU
- Press STOP, REWIND
- Enter 0 for multi-region
Philips DVD 783CH / DVD 793C
- Follow the instructions on area450.co.uk/lg5083hack.htm.
Philips DVD 930
- Stop the player, no disc has to be inserted
- Press 2, 7, 4
- An input field shows up
- Enter one of the following codes:
For RC 1: 0050001 281 56
For RC 2: 0020001 281 56
For RC 3: 0100001 281 56
For RC 4: 0120001 281 56 - Press any key
- Display turns red...
Caution! this only works 25x!
Philips DVD 950
- Press PLAY, 1, 5, 9
- An input field shows up
- Enter 008000 000 000 for RC1 or 001000 000 000 for RC2
- Press PLAY
- Display turns red...
Caution! this only works 25x!
Philips DVD 956
- Press PLAY
- Enter 159 101 040 000 140
- Press PLAY
Philips DVDR70 / DVDR72 / DVDR75 / DVDR77 / DVDR80 / DVDR610 / DVDR615 / DVDR725H / DVDR730 / DVDR880 / DVDR890 / DVDR985 / DVDR990 / DVDR1000 / DVDR5350H / DVDR7250H / DVDR7300H / HDRW720
- Turn on the player from the front panel (without a disc inserted)
- Press TUNER or the blue button (or open the HDD browser)
- Press PLAY
- Enter 159 121 212 005 255
- Press PLAY
- Turn the player off
Philips DVDR520H
- Go into the main menu
- Highlight "exit"
- Enter 2, 9, 6, 0
Philips DVDR630VR / DVDR3320V
- In DVD mode, press SYSTEM MENU
- Scroll down to highlight the 'lock' symbol
- Press seven times 0
- Press OK
Philips DVDR990 / ProDVD 175
- Turn on the player (with no disc / DVD mode)
- Press PLAY, 1, 5, 9
- A broken line is displayed
- Enter 121 212 005 00
- Press the button for the desired RC
- Press PLAY
limited to 25x
Philips DVDR3300H / DVDR3330H / DVDR5330H
- Turn on (with no disc)
- Switch to DVD mode
- Open tray
- Press PLAY
- Enter 159 064 135 124 255
- Press PLAY
- Turn off
Philips DVDR3305 / DVDR3350H / DVDR3355 / DVDR3360H / DVDR3365 / DVDR3370H / DVDR3380 / DVDR3390 / DVDR3400 / DVDR3450H / DVDR3455H / DVDR3460H / DVP 3500
- Switch on (with no disc)
- Press 0086000, OK when display shows "no disc"
- Switch off
Philips DVP 520 / DVP 524 / DVP 530 / DVP 532K / DVP 534K / DVP 3005 / DVP 3007 / DVP 3010 / DVP 3012 / DVP 5100 / DVP 5106K / DVP 5500S / DVP 5505S
- (DVP 5100/5106: Press EJECT)
- Press SYSTEM MENU
- Go to "Preference Page"
- Press 135566
- A menu shows up
- Select region with UP/DOWN (0 = codefree)
- Press SYSTEM MENU
Philips DVP 900SA / DVP 9000S
- Switch on (with no disc)
- Press PLAY on the player
- Press 1, 5, 9 on the remote
- Enter 222 222 005 255
- Press PLAY on the player
Philips DVP 3015K / DVP 3020 / DVP 3040 / DVP 3040K / DVP 5140 / DVP 5960
- Method 1:
- Open the disc tray
- Press SETUP
- Navigate to the preferences page
- Enter 138931
- Select the region using UP/DOWN
- Press PLAY
- Method 2:
- Open tray
- Press 9, 9, 9, 9, 0
Philips FWD550 / FWD596 / FWD750 / FWD796
- Switch on (no disc)
- Press PLAY
- Enter 159 023 798 90
- Press PLAY
Philips HTS3400D / HTS3401D / LX3000D / LX3500D / LX3700D / LX3750 / MCD370 / MX2500D / MX2600 / MX3550 / MX3600D / MX3660D / MX3700D / MX3800D / MX6050D
- Turn on the player (without a disc inserted)
- Press PLAY
- Press 159 023 793 90
- Press PLAY
- Confirmation should be displayed
- Turn the player off
Philips LX7000SA / LX7100SA
- Switch on (no disc)
- Press PLAY, 159 721 030 08, PLAY
Philips LX8000 / LX8000E / MX6000
- Turn on the player (without a disc inserted)
- Press PLAY
- Press 1, 5, 9
- A broken line is displayed
- Enter "111" for RC1 or "221" for RC2
- Enter "002" (LX 8000, LX 8000 SA (not E): "008")
- At last "08"
- Press PLAY twice
limited to 25x
Philips LX8200SA
- Switch on (no disc)
- Press PLAY, 159 222 036 08, PLAY
Philips MCD190
- Turn on (with no disc)
- Press 9, 7, 3, 5
- Enter the region code menu
- Change the region using UP/DOWN (0 = multi-region)
- Press OK, SYSTEM
Philips MCD510
- Change to Disc mode
- Open tray
- Press 123450
Philips MCD700 / MCD708
- Switch on (with no disc)
- Press SYSTEM
- Highlight the "preferences page"
- Press 811502
- Change the region using UP/DOWN (0 = multi-region)
- Press OK, SYSTEM
Philips MX3900D / MX3910D / MX3950D / MX5500D / MX5600D / MX5700D / MX5800SA / MX5900SA / MX6000i
- Switch on (with no disc)
- Press DISC/MEDIA
- Wait for "no disc" message
- Press DISC MENU
- Press 1, 5, 9 slowly
- Enter 222 222 005 255
- Press DISC MENU
- Wait for "done" message
- Press STANDBY
Philips PET 700 / PET 710
- Switch the player on
- Open tray
- Press SETUP
- Select Preferences
- Press 252315
- Press LEFT, DOWN
- Press 0 for multi region
- Press SETUP to exit
Philips PET 724 / PET 800 / PET 805 / PET 810 / PET 824 / PET 825 / PET 1000 / PET 1002
- Open the disc tray
- Press SETUP
- Go to "Preferences"
- Press OK
- Press 212225
- Press LEFT, DOWN
- Enter region (0 = codefree)
- Press SETUP
- Close the disc tray
Philips 14PT6007, 20DV6942, 20PT6441, 21PT6818, 21PT6820, 29PD6932, DV900VHS, DV910VHS, DVD 1010, DVD 400AV2, DVD 405AT, DVD 420, DVD 570M, DVD 619, DVD 621, DVD 715, DVD 720, DVD 721, DVD 731, DVD 740VR, DVD 750VR, DVD 752, DVD 755, DVD 755VR, DVD 757VR, DVD 782CH, DVD 815, DVD 835, DVD 840, DVD 850, DVD 860, DVD 940, DVD 940AT, DVD 941, DVD 962SA, DVD 972, DVD 975SA, DVDR560H, DVDR600VR, DVDR616, DVDR980, DVDR1500, DVDR3360H, DVDR3370H, DVDR3400, DVDR5330H, DVDR7250H, DVP 620VR, DVP 721VR, DVP 3050V, DVP 3055V, DVP 3100V, FWD5, FWD390, FWD790, HTS5700R, HTS9800W, JR32RWDVK, LX2000D, LX7500R, LX9000R, MCD295, MCD515, MCD702, MX5100VR, SACD962
0R, LX9000R, MCD295, MCD515, MCD702, MX5100VR, SACD962
Unlock Samsung DVD players - DVD hack
- Region codes:
- RC 1: 2, 9, 3, 3, 4
- RC 2: 3, 8, 7, 6, 7 (or 5, 7, 5, 3, 8)
- RC 3: 5, 6, 7, 3, 2
- RC 4: 7, 6, 8, 8, 4
- RC 5: 5, 3, 8, 1, 4
- RC 6: 2, 4, 4, 6, 2
Samsung CHT350 / DVD-3E / DVD-CM250 / DVD-CM350 / DVD-DV950 / DVD-R100 / DVD-S224 / DVD-S225 / DVD-S323 / DVD-S324 / DVD-S325 / DVD-S428K / DVD-V1000 / DVD-V2000 / DVD-V2200 / DVD-V3300 / DVD-V4600 / DVD-V4600M / DVD-V4800 / DVD-V5000 / DVD-V530 / DVD-V540 / DVD-V5500 / DVD-V55K / DVD-V6500 / DVD-V70 / DVD-V7000 / DVD-V72K / DVD-V7500 / DVD-V80 / DVD-V85 / DVD-VR300 / DVD-VR320 / DVD-VR320 E / SV-DVD1E / SV-DVD3E / SV-DVD40 / SV-DVD440 / SV-DVD540 / SV-DVD545 / SV-DVD54T / SV-DVD55 / SV-DVD640 / SV-DVD645P
- Turn on the player (without a disc inserted)
- Press and hold PLAY and FW (or STOP)
- "No Disc" is displayed
- Release the keys
- Press SUBTITLE, REPEAT (or just SUBTITLE or just REPEAT or MENU)
- Enter the corresponding combination for your current RC (see top of the page)
- Current RC should be displayed
- Press the button for the desired RC (9=codefree)
- Open the disc tray
- Turn the player off
Samsung DTB-D700F / DVD-709 / DVD-711 / DVD-811 / DVD-839 / DVD-909 / DVD-1010 / DVD-1011 / DVD-A500 / DVD-E137A / DVD-E137B / DVD-E138A / DVD-E138B / DVD-E232 / DVD-E234 / DVD- E235 / DVD-E237 / DVD-E317 / DVD-E335 / DVD-E337K / DVD-E338K / DVD-E435 / DVD-E437K / DVD-E537K / DVD-H40A / DVD-H40E / DVD-HD40 / DVD-HD745 / DVD-HD747 / DVD-HD748 / DVD-HD935 / DVD-HD937 / DVD-HD945 / DVD-HD948 / DVD-HD950 / DVD-HR720 / DVD-HR725 / DVD-M103 / DVD-M104 / DVD-M105 / DVD-M403 / DVD-MC20 / DVD-N504 / DVD-N505 / DVD-P142 / DVD-P144 / DVD-P241 / DVD-P243N / DVD-P245 / DVD-P249M / DVD-P250K / DVD-P255K / DVD-P347 / DVD-P350K / DVD-P355 / DVD-P433 / DVD-P450 / DVD-R100 / DVD-R120 / DVD-R121 / DVD-R122 / DVD-R125
- Power on your player with no disc in the tray
- Press REPEAT for 5 seconds
- Enter the corresponding combination for your current RC (see top of the page)
- Current RC should be displayed
- Press the button for the desired RC (9=multi-region)
- (Press OPEN)
Power off your player
Samsung DVD-511 / DVD-611 / DVD-809 / DVD-C637 / DVD-M103 / DVD-M107 / DVD-M108 / DVD-M203 / DVD-M204 / DVD-M205 / DVD-M305 / DVD-M405 / DVD-P145 / DVD-P148 / DVD-P213 / DVD-P233K / DVD-P244 / DVD-P247A / DVD-P248A / DVD-P248K / DVD-P543K / DVD-P548K / P650K / DVD-S124 / DVD-S128 / DVD-S221 / DVD-S223 / DVD-S228 / DVD-S328 / DVD-S423 / DVD-S424 / DVD-V72K / DVD-V5000
- Turn the player off
- Press and hold PLAY and STOP
- Turn on the player
- Language menu shows up
- Release the keys
- Select language
- Press REPEAT
- Enter the corresponding combination for your current RC (see top of the page)
- Current RC should be displayed
- Press the button for the desired RC (9=codefree)
- Open the disc tray
- Turn the player off
Samsung 707 / DVD-807 / DVD-907
- Press DVD of TV/DVD SELECT
- Insert DVD with foreign RC
- Remove DVD
- Press OPEN/CLOSE
- Press TIME SEARCH, 1, 1 and 9
- If this doesn't work, press TV, 2, 0 and 0. (for the new firmware versions)
Samsung DVD-HD841 / DVD-HD845 / DVD-HD850 / DVD-HD941 / DVD-M104? / DVD-N2000 / DVD-N501 / DVD-P231 / DVD-P421 / DVD-P721M / DVD-S222
You will need a remote control from a Aiwa sound system- Turn on your DVD player
- Open the disc deck
- Using the Aiwa remote press (SHIFT,) REPEAT (DVD player's display will be totally light.)
- Press (SHIFT,) PROGRAM
- Press (SHIFT,) CLOCK - and the display will show the word "ADJUST"
- At this time using the DVD remote control press 9
Samsung DVD-K100 / HT-DB120 / HT-DB300 / HT-DB600 / HT-DL100 / HT-DL200 / HT-DL200P / HT-70DRH/XEU / HT-DM150 / HT-DM550 / HT-DS110 / HT-DS400 / HT-DS490 / HT-DS610 / HT-DS660T / HT-DS1000 / HT-P38 / HT-SK5 / HT-WP38
- Unplug the player for about 30 secs
- Turn on the player using the remote
- Press ENTER
- Press 8, 4, 2, 6, 9
- Press ENTER
- Disc tray opens, player turns off
Samsung DVD-L70 / DVD-L100 / DVD-L200
- Press REPEAT (maybe you have to hold it)
- Press UP, DOWN, RIGHT, LEFT
- 2-digit number should be displayed
- Press DOWN until 09 is set
- Press REPEAT A-B
- Open the disc tray
- Close the disc tray
- Turn the player off
Samsung DVD-M101
- Insert a foreign DVD
- Press PLAY and FFW
- Enter region (0 = multi-region)
Samsung DW-15G10 / UW17J11VD / UW21J10VD
- Power on and go to DVD mode
- Make sure there is no disc
- Press 7, 7, PLAY
- Press ENTER to enter region code change mode
- Press 0 (for multi-region)
- Press RETURN
Samsung CSM2077DV / CSN2077DV / DVD-608 / DVD-615 / DVD-905 / DVD-916 / DVD-927 / DVD-C600 / DVD-C601 / DVD-C621 / DVD-C625 / DVD-C643P / DVD-C700 / DVD-E135 / DVD-E219 / DVD-E238 / DVD-E338J / DVD-HD1000 / DVD-K110 / DVD-L1200 / DVD-M201 / DVD-M208K / DVD-M307 / DVD-P230 / DVD-P242 / DVD-P313 / DVD-P331 / DVD-P341 / DVD-P345 / DVD-P346 / DVD-P350K / DVD-P401 / DVD-P423 / DVD-P438J / DVD-P445K / DVD-P538K / DVD-P701 / DVD-R2000 / DVD-R3000 / DVD-R4000 / DVD-S126 / DVD-S229 / DVD-S320 / DVD-S321 / DVD-S624M / DVD-V52K / DVD-V2500 / DVD-V3500 / DVD-V3650 / DVD-V3800 / DVD-V4300 / DVD-V65K / DVD-V8000 / DVD-V8500 / DVD-V8600 / DVD-VR325 / HT-DB750M / HT-DS450 / HT-DS630T / HT-DS700 / HT-DS900 / HT-EV100 / HT-P10 / HT-P50 / Max945D / MaxDN55 / SV-DVD3JG / SV-DVD6 / SV-DVD90
Sharp DV-550
- Press STOP
- Press SETUP
- Press PAUSE, 1, 2, 3
- Select region
Sharp DV-620 / DV-S15H
Method 1:- Press SETUP
- Press 3, 8, 8, 8, 3 (or 3, 7, 7, 7, 4)
- Select region
Method 2:- Press SETUP
- Go to "Preferences"
- Press PAUSE, PREV CHAPTER, NEXT CHAPTER
- Select desired RC
Sharp DV-740 / DV-760
- Open up Windows Notepad or a similar text editor and type in (without the quotation marks, you can replace "R0" with "R1" for region 1 and so on):
- For DV740U (US, Canada) --> "TSDVDREG-2001-9629735-R0"
- For DV740X (Aus, NZ, Singapore) and DV740H/DV740S (UK, Europe) --> "TSDVDREG-2001-8918448-R0"
- Save this file as CREGIN.TXT
- Burn the file to CD-R(W) as ISO9660 Mode 1
- Put the CD-R(W) in player
- After 15 seconds or so "R0" should appear in the lower left hand corner of your TV screen.
Sharp CD-DVD500 / DV-560H / DV-600 / DV-600U / DV-650U / DV-654Z / DV-660 / DV-700S / DV-710 / DV-720 / DV-750 / DV-770 / DV-775 / DV-890 / DV-HR300 / DV-HR400 / DV-HR450 / DV-HR480 / DV-L70 / DV-L80 / DV-L88S / DV-L90TC / DV-LS10H / DV-NC100H / DV-NC55 / DV-NC60H / DV-NC65H / DV-NC65S / DV-NC70U / DV-NC80X / DV-NC85 / DV-RW250 / DV-RW260 / DV-RW270 / DV-RW2U / DV-RW340U / DV-RW350U / DV-S11S / DV-S1H / DV-S1S / DV-S1U / DV-S1X / DV-S25U / DV-S2U / DV-S5UM / DV-SF20 / DV-SF60P / DV-SL10 / DV-SL20U / DV-SL80U / DV-SL80X / DV-SL8W / DV-SR3U / DV-SR45U / DV-SV80H / HT-AT4000DV / SD-AT100 / SD-AT50DV / SD-SH111 / XL-DV50H / XL-DV60
Sherwood DVD-1000K
- Open the disc tray
- Press 8, 8, 8, 8
- "System Menu" is displayed
- Press ENTER
- Select RC with UP/DOWN (0=codefree)
- Press ENTER
- Select "Exit Menu" with UP and DOWN
- Press ENTER
- Close the disc tray
Sherwood DVD-6105K
- Open the disc tray
- Press 9, 7, 3, 5
- "System Menu" is displayed
- Press ENTER
- Select RC with UP/DOWN (0=codefree)
- Press ENTER
- Select "Exit Menu" with UP and DOWN
- Press ENTER
- Close the disc tray
Sherwood V-756
- Turn on the player
- "No Disc" is displayed
- Press STOP, FORWARD SKIP, BACKWARD SKIP, PLAY on the player
- Press 0 on the remote
- Open disc tray
- Insert a DVD with the desired RC
- Close the disc tray
- "Wrong Region Code" is displayed on the TV, but "Complete" on the display!
- Open and close the disc tray
Sherwood VD-4106R
- Press PAUSE
- Press 3, 1, 4, 1, 5, 9
- Press the button for the desired RC (0=codefree)
- Press PAUSE
- Turn the player off
Sherwood VD-4500
- Open disc tray
- Press FORWARD SKIP on the front panel for two seconds
- Press 9 on the remote
Sherwood V-768, DV-5108, VR-670, VR-758
Sanyo DRW-1000
- Turn on (with no disc)
- Press SETUP
- Move down to the "lock" picture
- Press 0, 0, 0, 0
- Press ENTER
Sanyo DVD-1550A ? / DVD-5100 / DVD-6040 / DVD-6070 ? / DVD-7201
- Press PROGRAM
- Press RIGHT, RIGHT, ENTER, PLAY
Sanyo DVD-1550A / DVD-6070
- Download spookytooth-sanyo1500crack.zip
- Write the files Dummy.dat, Sanyo.dvd, Sanyo.prg to a CD. The volume label has to be 001017_1251
- Insert the disc into your DVD player and wait
Sanyo DVD-DX501 / DVD-DX510
- Open tray
- Enter 8, 2, 8, 6, X (X = region, 0 is multiregion)
- Close tray
Sanyo DVD-SL33
- Switch on
- Enter 89239990
Sanyo DVD-SX20
- Switch on, wait for "no disc"
- Press DISPLAY
- Select "Video"
- Enter 1, 3, 5, 7
- Change the region using UP/DOWN (0 = multi-region)
- Press DISPLAY
Sanyo DVR-S120
- Switch on, wait for "no disc"
- Press SYSTEM
- Press PLAY
- Enter 1, 5, 9
- Enter 064135124255
- Press PLAY
Sanyo DVR-V100E
- Press SETUP
- Select "System Info" from the OSD
- Enter 1, 1, 0, 1
- Enter the region (0 = multi-region)
- Press OK/ENTER
- Press SETUP
Sanyo DVW-5000
- Switch on, wait for "no disc"
- Press PAUSE
- Enter 314159
- Press the key for the region you want (0 = multi-region)
- Press PAUSE
- Switch off
Sanyo DVW-7000 / DWM-360 ? / DWM-370 / DWM-380
- Switch on, wait for "no disc"
- Enter 11233543254346
- Switch off
Sanyo DVW-7100 / HX-DX1E / HX-DX2E
- Follow the instructions on www.area450.co.uk/lg5083hack.htm
Sanyo DWM-395
- Press PROGRAM
- Press LEFT, LEFT, ENTER, PLAY
Sanyo DWM-450
- Open tray
- Press 5, 7, 9, 2
- Select 0 for multi-region
- Close tray
Sanyo HV-DX300A
- Open tray
- Enter 0, 5, 2, 0
- Press UP, DOWN, LEFT, RIGHT
- Press 0 for multi-region
Sanyo AVD-8501 / DAV-821 / DC-AVD8501 / DC-TS755KR / DC-TS790 / DC-TS5233 / DRW-500 / DVC-2000 / DVC-2500 / DVC-2700 / DVD-077 / DVD-7000 / DVD-7300DX / DVD-9201 / DVD-9203 / DVD-9205SU / DVD-DX60 / DVD-HP58 / DVD-LS70 / DVD-SL18 / DVD-SL20 / DVD-SL22 / DVD-SL25 / DVD-SL30KR / DVD-SL40 / DVD-SL50 / DVD-SL330 / DVD-SX10 / DVR-H200 / / DVW-6000 / DVW-6100 / DVW-7200 / DWM-390 / DWM-400 / DWM-470 / DWM-1000 / DWM-2500 / DWM-2600 / DWM-3000 / DWM-3500 / DWM-3800
Sony Playstation 2 / SCPH 10000
Method 1:- Press and hold CIRCLE, RIGHT, L1
- Press and hold L3 and push the stick in hard
- Boot into the PS2 browser without a CD/DVD in the tray
- Press CIRCLE and R1 on the DVD
- Hold RIGHT until a menu appears
- Press CIRCLE and R1 again
Method 2:- Load the DVD into the PS2
- At the browser screen, select the CD icon the press and hold SQUARE then CIRCLE until the DVD menu appears, holding both buttons all of the time
- Either select the PLAY icon or the MOVIE START icon
Sony Playstation 2
Have a Messiah 2 or Magic 2 chip installed.
Sony SLV D 900 / SLV-D900E
- Turn on the player (without a disc inserted)
- Press SUBTITLE, 3, 8, 7, 6, 7
- Current RC should be displayed
- Press 9
- This has to be done every time you restart the player
Sony DVP-F21 / DVP-LS500 / DVP-LS755 / DVP-LS785 / DVP-NC615 / DVP-NS52 / DVP-NS300 / DVP-NS305 / DVP-NS310 / DVP-NS315 / DVP-NS32 / DVP-NS330 / DVP-NS333 / DVP-NS355 / DVP-NS360 / DVP-NS400 / DVP-NS405 / DVP-NS410 / DVP-NS430 / DVP-NS433 / DVP-NS575 / DVP-NS585 / DVP-NS590 / DVP-NS700 / DVP-NS730 / DVP-NS765 / DVP-NS900 /DVP-NS905 / DVP-NS930 / DVP-NS955 / DVP-PQ1 / DVP-PQ2 / RDR-GX3 / RDR-GX7 / RDR-GX300 / RDR-GX700 / RDR-GXD500 / RDR-HX900 / RDR-HX1000
Please note that, some players do not display "success" when hacked.
The infrared service codes required to make the update are available on the Internet. Unfortunately, not many people have an appropriate device to enter the codes into. You basically need a programmable remote (Philips Pronto, One-For-All) or a PDA (Palm, iPAQ) with suitable software.
This guide shows you how to make the update with a regular PC equipped with an IRDA port.
- Download the winsamp -package from Blank Franks site.
This innovative piece of software allows you to send standard home electronics IR signals using a PC IRDA port. - Extract the package onto a bootable DOS floppy disk.
- Save the following code into a file named "REMOTE.TXT" and place it in the same directory as the package above.
"Sony Region Free Code 1",84,24,6,12,6,12,6,12,6,12,6,12,6,12,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,117,24,6,12,6,12,6,12,6,12,6,12,6,12,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,117 "Sony Region Free Code 2",84,24,6,12,6,6,6,12,6,6,6,6,6,12,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,118,24,6,12,6,6,6,12,6,6,6,6,6,12,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,118 "Sony Region Free Code 3",84,24,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,118,24,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,118 "Sony Region Free Code 4",84,24,6,12,6,12,6,12,6,12,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,117,24,6,12,6,12,6,12,6,12,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,117 "Sony Region Free Code 5",84,24,6,12,6,6,6,12,6,6,6,12,6,6,6,6,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,118,24,6,12,6,6,6,12,6,6,6,12,6,6,6,6,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,118
- Boot up your PC from the floppy disk and run winsamp.exe
If your IRDA port doesn't appear as COM2 you may override this by using an appropriate command line switch. For example, use COM1 by running 'winsamp C1' - Press the 'r' key to load up the codes into winsamp
- Make sure your DVD player is in standby mode and your IRDA port is within range
- Run the IR codes from 1 to 5 by pressing Enter on each corresponding button
- Your DVD player should start up and display the text "SUCCESS"
- Repeat step 7. Your player should return to standby mode.
Your player is now multi-region.
Sony DVP-NC85H, DVX-11A, SLV-D500P, SLV-D980P
- Region codes:
Sharp DV-550
- Press STOP
- Press SETUP
- Press PAUSE, 1, 2, 3
- Select region
Sharp DV-620 / DV-S15H
- Method 1:
- Press SETUP
- Press 3, 8, 8, 8, 3 (or 3, 7, 7, 7, 4)
- Select region
- Method 2:
- Press SETUP
- Go to "Preferences"
- Press PAUSE, PREV CHAPTER, NEXT CHAPTER
- Select desired RC
Sharp DV-740 / DV-760
- Open up Windows Notepad or a similar text editor and type in (without the quotation marks, you can replace "R0" with "R1" for region 1 and so on):
- For DV740U (US, Canada) --> "TSDVDREG-2001-9629735-R0"
- For DV740X (Aus, NZ, Singapore) and DV740H/DV740S (UK, Europe) --> "TSDVDREG-2001-8918448-R0"
- Save this file as CREGIN.TXT
- Burn the file to CD-R(W) as ISO9660 Mode 1
- Put the CD-R(W) in player
- After 15 seconds or so "R0" should appear in the lower left hand corner of your TV screen.
Sharp CD-DVD500 / DV-560H / DV-600 / DV-600U / DV-650U / DV-654Z / DV-660 / DV-700S / DV-710 / DV-720 / DV-750 / DV-770 / DV-775 / DV-890 / DV-HR300 / DV-HR400 / DV-HR450 / DV-HR480 / DV-L70 / DV-L80 / DV-L88S / DV-L90TC / DV-LS10H / DV-NC100H / DV-NC55 / DV-NC60H / DV-NC65H / DV-NC65S / DV-NC70U / DV-NC80X / DV-NC85 / DV-RW250 / DV-RW260 / DV-RW270 / DV-RW2U / DV-RW340U / DV-RW350U / DV-S11S / DV-S1H / DV-S1S / DV-S1U / DV-S1X / DV-S25U / DV-S2U / DV-S5UM / DV-SF20 / DV-SF60P / DV-SL10 / DV-SL20U / DV-SL80U / DV-SL80X / DV-SL8W / DV-SR3U / DV-SR45U / DV-SV80H / HT-AT4000DV / SD-AT100 / SD-AT50DV / SD-SH111 / XL-DV50H / XL-DV60
Sherwood DVD-1000K
- Open the disc tray
- Press 8, 8, 8, 8
- "System Menu" is displayed
- Press ENTER
- Select RC with UP/DOWN (0=codefree)
- Press ENTER
- Select "Exit Menu" with UP and DOWN
- Press ENTER
- Close the disc tray
Sherwood DVD-6105K
- Open the disc tray
- Press 9, 7, 3, 5
- "System Menu" is displayed
- Press ENTER
- Select RC with UP/DOWN (0=codefree)
- Press ENTER
- Select "Exit Menu" with UP and DOWN
- Press ENTER
- Close the disc tray
Sherwood V-756
- Turn on the player
- "No Disc" is displayed
- Press STOP, FORWARD SKIP, BACKWARD SKIP, PLAY on the player
- Press 0 on the remote
- Open disc tray
- Insert a DVD with the desired RC
- Close the disc tray
- "Wrong Region Code" is displayed on the TV, but "Complete" on the display!
- Open and close the disc tray
Sherwood VD-4106R
- Press PAUSE
- Press 3, 1, 4, 1, 5, 9
- Press the button for the desired RC (0=codefree)
- Press PAUSE
- Turn the player off
Sherwood VD-4500
- Open disc tray
- Press FORWARD SKIP on the front panel for two seconds
- Press 9 on the remote
Sherwood V-768, DV-5108, VR-670, VR-758
Sanyo DRW-1000
- Turn on (with no disc)
- Press SETUP
- Move down to the "lock" picture
- Press 0, 0, 0, 0
- Press ENTER
Sanyo DVD-1550A ? / DVD-5100 / DVD-6040 / DVD-6070 ? / DVD-7201
- Press PROGRAM
- Press RIGHT, RIGHT, ENTER, PLAY
Sanyo DVD-1550A / DVD-6070
- Download spookytooth-sanyo1500crack.zip
- Write the files Dummy.dat, Sanyo.dvd, Sanyo.prg to a CD. The volume label has to be 001017_1251
- Insert the disc into your DVD player and wait
Sanyo DVD-DX501 / DVD-DX510
- Open tray
- Enter 8, 2, 8, 6, X (X = region, 0 is multiregion)
- Close tray
Sanyo DVD-SL33
- Switch on
- Enter 89239990
Sanyo DVD-SX20
- Switch on, wait for "no disc"
- Press DISPLAY
- Select "Video"
- Enter 1, 3, 5, 7
- Change the region using UP/DOWN (0 = multi-region)
- Press DISPLAY
Sanyo DVR-S120
- Switch on, wait for "no disc"
- Press SYSTEM
- Press PLAY
- Enter 1, 5, 9
- Enter 064135124255
- Press PLAY
Sanyo DVR-V100E
- Press SETUP
- Select "System Info" from the OSD
- Enter 1, 1, 0, 1
- Enter the region (0 = multi-region)
- Press OK/ENTER
- Press SETUP
Sanyo DVW-5000
- Switch on, wait for "no disc"
- Press PAUSE
- Enter 314159
- Press the key for the region you want (0 = multi-region)
- Press PAUSE
- Switch off
Sanyo DVW-7000 / DWM-360 ? / DWM-370 / DWM-380
- Switch on, wait for "no disc"
- Enter 11233543254346
- Switch off
Sanyo DVW-7100 / HX-DX1E / HX-DX2E
- Follow the instructions on www.area450.co.uk/lg5083hack.htm
Sanyo DWM-395
- Press PROGRAM
- Press LEFT, LEFT, ENTER, PLAY
Sanyo DWM-450
- Open tray
- Press 5, 7, 9, 2
- Select 0 for multi-region
- Close tray
Sanyo HV-DX300A
- Open tray
- Enter 0, 5, 2, 0
- Press UP, DOWN, LEFT, RIGHT
- Press 0 for multi-region
Sanyo AVD-8501 / DAV-821 / DC-AVD8501 / DC-TS755KR / DC-TS790 / DC-TS5233 / DRW-500 / DVC-2000 / DVC-2500 / DVC-2700 / DVD-077 / DVD-7000 / DVD-7300DX / DVD-9201 / DVD-9203 / DVD-9205SU / DVD-DX60 / DVD-HP58 / DVD-LS70 / DVD-SL18 / DVD-SL20 / DVD-SL22 / DVD-SL25 / DVD-SL30KR / DVD-SL40 / DVD-SL50 / DVD-SL330 / DVD-SX10 / DVR-H200 / / DVW-6000 / DVW-6100 / DVW-7200 / DWM-390 / DWM-400 / DWM-470 / DWM-1000 / DWM-2500 / DWM-2600 / DWM-3000 / DWM-3500 / DWM-3800
Sony Playstation 2 / SCPH 10000
- Method 1:
- Press and hold CIRCLE, RIGHT, L1
- Press and hold L3 and push the stick in hard
- Boot into the PS2 browser without a CD/DVD in the tray
- Press CIRCLE and R1 on the DVD
- Hold RIGHT until a menu appears
- Press CIRCLE and R1 again
- Method 2:
- Load the DVD into the PS2
- At the browser screen, select the CD icon the press and hold SQUARE then CIRCLE until the DVD menu appears, holding both buttons all of the time
- Either select the PLAY icon or the MOVIE START icon
Sony Playstation 2
- Have a Messiah 2 or Magic 2 chip installed.
Sony SLV D 900 / SLV-D900E
- Turn on the player (without a disc inserted)
- Press SUBTITLE, 3, 8, 7, 6, 7
- Current RC should be displayed
- Press 9
- This has to be done every time you restart the player
Sony DVP-F21 / DVP-LS500 / DVP-LS755 / DVP-LS785 / DVP-NC615 / DVP-NS52 / DVP-NS300 / DVP-NS305 / DVP-NS310 / DVP-NS315 / DVP-NS32 / DVP-NS330 / DVP-NS333 / DVP-NS355 / DVP-NS360 / DVP-NS400 / DVP-NS405 / DVP-NS410 / DVP-NS430 / DVP-NS433 / DVP-NS575 / DVP-NS585 / DVP-NS590 / DVP-NS700 / DVP-NS730 / DVP-NS765 / DVP-NS900 /DVP-NS905 / DVP-NS930 / DVP-NS955 / DVP-PQ1 / DVP-PQ2 / RDR-GX3 / RDR-GX7 / RDR-GX300 / RDR-GX700 / RDR-GXD500 / RDR-HX900 / RDR-HX1000
- Please note that, some players do not display "success" when hacked.
- Download the winsamp -package from Blank Franks site.
This innovative piece of software allows you to send standard home electronics IR signals using a PC IRDA port. - Extract the package onto a bootable DOS floppy disk.
- Save the following code into a file named "REMOTE.TXT" and place it in the same directory as the package above.
"Sony Region Free Code 1",84,24,6,12,6,12,6,12,6,12,6,12,6,12,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,117,24,6,12,6,12,6,12,6,12,6,12,6,12,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,117 "Sony Region Free Code 2",84,24,6,12,6,6,6,12,6,6,6,6,6,12,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,118,24,6,12,6,6,6,12,6,6,6,6,6,12,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,118 "Sony Region Free Code 3",84,24,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,118,24,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,118 "Sony Region Free Code 4",84,24,6,12,6,12,6,12,6,12,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,117,24,6,12,6,12,6,12,6,12,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,117 "Sony Region Free Code 5",84,24,6,12,6,6,6,12,6,6,6,12,6,6,6,6,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,118,24,6,12,6,6,6,12,6,6,6,12,6,6,6,6,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,118
- Boot up your PC from the floppy disk and run winsamp.exe
If your IRDA port doesn't appear as COM2 you may override this by using an appropriate command line switch. For example, use COM1 by running 'winsamp C1' - Press the 'r' key to load up the codes into winsamp
- Make sure your DVD player is in standby mode and your IRDA port is within range
- Run the IR codes from 1 to 5 by pressing Enter on each corresponding button
- Your DVD player should start up and display the text "SUCCESS"
- Repeat step 7. Your player should return to standby mode.
Your player is now multi-region.
The infrared service codes required to make the update are available on the Internet. Unfortunately, not many people have an appropriate device to enter the codes into. You basically need a programmable remote (Philips Pronto, One-For-All) or a PDA (Palm, iPAQ) with suitable software.
This guide shows you how to make the update with a regular PC equipped with an IRDA port.
Sony DVP-NC85H, DVX-11A, SLV-D500P, SLV-D980P
ඔනැම ඞීවිඞී යන්ත්රයක කන්ටි්ර කොඩි ව්ස්තර මෙම වෙබ් අඩව්යෙන් ලබාගතහැක